Product Data | Performance Data | Dimensional Specifications | Product Data Sheet

PERFORMANCE DATA -MODELS 105, 107 & 113

PERFORMANCE DATA

105
107
113

Starting Torque

300 oz. in. @ 1 RPM

30 oz. in. @ 1 RPM

60 oz. in. @ 1 RPM

Running Torque

300 oz. in. @ 1 RPM

60 oz. in. @ 1 RPM

60 oz. in. @ 1 RPM

Standard Voltages

24/120/240 VAC

24/120/240 VAC

24/120/240 VAC

Standard Frequency

60 Hz.
60 Hz.
60 Hz.

Power Input (Nominal)

2.7 Watts

1.5 Watts

2.7 Watts

Direction of Rotation

CW & CCW
CW & CCW
CW & CCW

Operating
Temperature Range

-4ºF to 131ºF
-20ºC to 55ºC

-4ºF to 131ºF
-20ºC to 55ºC
-4ºF to 131ºF
-20ºC to 55ºC

Clutches*

One or Two way
One or Two way
One or Two way

Gear Train Rating

Standard & 
Heavy Duty
Standard & 
Heavy Duty
Standard & 
Heavy Duty
Static**

90-160 oz. in.
90-160 oz. in.
90-160 oz. in.
Dynamic***

30-150 oz. in.
30-150 oz. in.
30-150 oz. in.

Standard Mounting

2 Hole
2 Hole
2 Hole
* Slip Clutch devices are built into a gear train to permit manual rotation of the output shaft.  One-way clutch permits manual advances in the direction of powered shaft rotation only.  Two-Way Clutch permits manual turning in either direction, but is not designed for continuous slippage and should not be relied upon to protect a gear train against excessive torque loads.  ** Static Torque rating is the maximum static load that can be sustained without substantial risk of damage to the gear train.  *** Dynamic Torque rating is the maximum load the gear train can drive continuously. 

 


 

 

M.H. Rhodes/Cramer Company • 105 Nutmeg Road South • South Windsor, CT 06074 USA

Copyright © 2009 M.H. Rhodes/Cramer Company, divisions of Capewell Components Company, LLC. All rights reserved. Privacy Policy
Powered by ImageWorks, LLC